Hey Guys
First timer here, I'm reloading 30-06 with 165 gr. Hornady SP's
I'm starting at 56 grains of IMR4350 working up batches of 5 at 56,56.5,57,57.5 and stopping at 58 grains. Being new I'm using a Lee Perfect powder measure by volume, making each load a little light and then using a powder trickler to bring up tofull charge on a Lee Safety Powder Scale.
My concern is that the powder is almost a 1/2 in below the top of the case neck and when I compare where the bullet seats it seems that the bullet is sitting directly on top of the powder charge.
I got my load data from the 13th edition of Speer manual.
Is this anything to be concerned About?
Thanks!!