Some of you may remember the thread I had in the bowhunting forum a couple daysago( http://www.huntingnet.com/forum/tm.aspx?m=2610747)about the bow I have been playing with that has a bent riser.I was just going to leave well alone but I am not wired that way so I cranked it up to 70# and proceeded to straighten it some more.I figured I would fix it or break it.


After all was said and done,this is what I ended up with. This is in the static position,full draw is best but I don't have a shooting machine at my house,it will be on one before it is over.


TOP CAM




STRING






BOTTOM LIMB POCKET







TOP LIMB POCKET






STRAIGHT EDGE FROM BOTTOM TO TOP






RESULTS WITH CENTER SHOT SET CORRECTLY WITH CORRECT SPINE ARROW




AND,it maintained the same integrity when I cranked the bow down to 56#'s