It was a combination of the mounting locations for the CJ, the quiver and the threaded mounts on my riser. The two seperated (upper and lower) arrow shaft holders on the softlok were interfering with the slide adjustment knob on the CJ. I ended up moving being able to use the two lower mounting holes on my Soft-Lok lined up with the CJ, and then took a simple round head screw, filed one edge flat and went in from the back edge of the riser through one of the mounting holes in the softlok and through the back of a mounting hole in the CJ. It's complicated sounding, but it's not. I will try to get pictures when I go home tonight. The 3 arrow might be differen, however, as I have the 5 arrow.