HuntingNet.com Forums - View Single Post - Vibra blocks on bowtechs
View Single Post
Old 03-04-2003 | 10:24 PM
  #6  
Matt / PA's Avatar
Matt / PA
Giant Nontypical
 
Joined: Feb 2003
Posts: 5,497
Likes: 0
From: Dover, PA USA
Default RE: Vibra blocks on bowtechs

Dave,
If you look at the bow limb directly from the side, you will see that it is much fatter at the forked end...........then it tapers down to a much thinner and relatively uniform width all the way to the limb pocket. I like to place the Limbsavers right at the point where the limb is almost entirely tapered down, just slightly up the slope of the taper. Without a picture this is a difficult description I know.......[>:] Its not a HUGE difference, not like shooting the bow with or without the Limbsavers attached, but I could feel and hear a difference over placing them on the fat forked end of the limb, especially with the Mighty Mite for some reason.
As for the Hush Kit Silencers.........someone here weighed them on a grain scale and found them to be 23grs a piece. I wish someone would weigh a SIMS Leech for me for comparison, but that seems heavy to me. Regardless of potential speed loss, as much as I like BowTech products I have to say that the SIMS leeches work better for noise and vibration reduction. They are better than nothing obviously, so that' s a plus with respect to not having to immediately purchase another product for a brand new bow if you don' t feel like spending any more money on add ons.........I' ll put it this way, to my ears the Leeches are an " Upgrade" .
I had every intention of testing speed with regards to bare string vs.Hush Kit vs. Leeches but got too excited and just started shooting and changing things as usual.
Matt / PA is offline  
Reply