Try cutting a srip of cardboard about one inch wide and 2 inches long. I use a matchbook cover. Loosten the front stock screw and slip it in under and around the barrel about 1 1/2 to 2 inches in from the end. Tighten the screw again and give it a try. If it clears up the problem then take it out and put some sealer on it and put it back in. Remington uses a pressure point toward the forend of the stock and there bust be pressure there for them to shoot right. They do this because it does about the same thing as bedding the stock but its much cheaper. If that does not work then try some of the above cures. However nine time out of ten this will fix a Remington.