Taken on 11/08/07 in upper part of Wyandot county Ohio. Below is a link to the original post when harvest was made. Head was frozen and waiting on Taxidermy videos from wasco on skinning.

http://www.huntingnet.com/forum/tm.aspx?m=2248625&mpage=18



Right Left

MB15 2/815 1/8

G14 0/83 2/8
G25 6/84 5/8
G32 7/82 4/8

H15 6/84 1/8
H23 5/83 5/8
H33 0/82 6/8
H42 0/81 7/8


IS 13 4/8
AB Pts0 5/8

Total Gross Score:94 2/8" **ENTERED**



Rob, this is my first time scoring a buck. You said in the rules that we would use the P&Y scoring method and that is the sheet I used. I may be wrong, but I have a eight point buck, So I have a MB number, and a G-1, G-2 and a G-3. according to to the P&Y sheet I measure the first H-1 between the antler burr and first point, the G-1 or brow tine correct? So I should have a H-1( between the burr and G-1 or brow tine) A H-2( between the G-1 and the G-2) A H-3 (between the G-2 and G-3) and a H-4 ( between the G-3 and MB tip per the P&Y sheet correct?) Seems some guys have all there H-X numbers and some guys left some off, did they forget to measure between the G-3 and MB tip or the burr and G-1? Or did I do it wrong? Edit this accordingly if I did, but some guys have them all and some guys do not?

EDIT: Just went back and looked at all the post. Looks like I did it like you and Greg did it and about half the guys did. Seems like some guys left off some good points! Edit off this last parts if you feel I am right, if not please PM me.