Prob 2 first.... IF you are using the fastset gel, DON' T wipe the base of the vane. The vanes USUALLY have a chemical on them to make them adhere better with AAE fastset. I know AAE vanes have this chemical on the base.

Prob. 1. IF your vanes are not setting perfectly on the arrow the entire lenght that means you have either too much or too little offset applied. I would place the vane in the clamp but have a little space between the base and the clamp edge. Then place vane on the arrow and adjust the jig until the vane base rest on the the arrow the entire length.

DON' T get discouraged. It takes some patience and a little trial and error to get it perfect.

ENJOY. It is supposed to be fun.[8D]