ORIGINAL: smokepolehall
Happy Pappy something is hitting or very loose on yer CB. Bring yer string back close to high brace line.Make sure its not getting to hit the riser. You have trimmed plastic limb spacers. Sometimes those arrows get off, like they said use one and same one so you can see whats going on. Both limbs are snug with their limb bolts? The riser is snug in place and not moving from side to side at each shot ?
The bottom of the riser has two small lips on either side that go over [outside] the rail edges. It's almost impossible for the riser to move once its aligned right and the two Allen screws snugged up good. This is the main reason you can take one apart for transport and re-assemble w/ no change in poi. One other thing I don't recall being mentioned is check to see if the string is sitting square to the rail when at rest. One more thing about Danny Miller. No matter where you buy your Excal products in the USA, if there is a problem, they end up at Danny's. You Excal guys can save alot of time and grief dealing directly w/ him.