Please keep in mind that my voice is that of no experience, but I have read extensively on the subject.

Its my understanding that you need a softer lube on your bullets for best accuracy and reduction of fouling. Also after the volume of powder has been established by how much the case can hold, a drop tube should be used to insure consistant loading.

Everything Ive read on the subject calls for magnum primers in BP loads for best accuracy and consistant ignition.

In many cases lubricated stiff paper wads are also used to protect the bullet base during ignition.

Plastic funnels and tubes should be avoided due to the build up of static electricity, and dead air space in your cartridges will cause sudden and eratic spikes in pressure.

early