I would definetly go with the conquest III. Pound for pound you will find no other bow on the market, with the same geometry(axle to axle, brace height) that will as the conquest. The 41 inch axle to axle length and the 7 inch brace height will make it east to shoot, and you will still have the speed you need for 3d. I have a conquest II with a 28" draw length at 69 pounds and i get 288. You would be around 8 feet faster i would guess with your extra inch of draw length, and shooting a few less pounds. The only change i see to the new conquest III is the limb cup design, so it should be very close to the conquest II.