Hoytusa10,
I have the cosmic on my bow now. I' m assuming that the pin won' t go any higher to put you on target at 10? If this is the case...take the allen screws off the metal casing that hold the plastic pin housing off. There are numerous screw holes down the line of it...just put it in the next higher one.

If it' s already in the highest one....check to see if the 2 allen head screws are above the pin housing tube or below. If it' s above, remove the pin housing from the mounting casing completely, flip the mounting casing so the hole for the pin housing tube is ABOVE the 2 allen head screws and try this. That' s as far up as it will go.
Hope this helps. If I didn' t make that clear you can email me and I' ll explain better send pics of mine along as well.