Well,there is more going on than what most will pick up on but it really isn't all that bad.


The stance is the first thing I see.The width is good but from the pic,it seems you have your front footforward(toward the camera) too much.This would be considered a closed stance.You really need to open up some to where the feet are perpendicular to the target to just open a little.(whichever feels better and has better results)


You aslo appear to be leaning back.Your shoulders should be directly over your feet.Yours seem to be back behind SLIGHTLY.When fixing this,it will feel like you are leaning forward so that is normal.Practice in front of a mirror to SEE what the proper stance looks and feels like.


Bow arm,is too bent imo.Try straightening it out a little,but not to the point you lock it.This might be one of those things to experiment with to see where you like it best.I think this can be done without a draw length change.

Angles are hard to repeat so when you can eliminate them from your form,that usually equalls better accuracy.




Grip is the next item up for bid.[8D]Go ahead and rotate the wrist and forearm at a bit of an angle,this will give you clearance that you might lose from straightning the arm.It will also eliminate the torque associated with too much palm in the grip.It will also put pressure straight back into the hand instead of on the side(torque)which caneliminate some left right issues.


Your release is too long,too hard to get the knuckle over the release and apply pressure without punching or reaching.


Last but not least,,I agree,the bow sling is too tight.That will cause torque.