While you could probably shoot 3 to 5+ shots without swabbing between shots with the Powerbelts you most likely will not get the best accuracy by doing that. Cayugad has used with great success the winshield wwasher fluid/isopropel alchol (50/50) mix to swab between shots followed by dry patches. Others have used windex and other various mixtures to swab with. I use a tried and true and available spit patch for a quick swab method. All you need is a patch and some spit. I just touch it to my tongue to get it lightly damp, not saturated, and run it down the bore in short strokes to get the major fouling out, then flip it over and do it again. If the patch is not too wet I'm ready to load, if wet I run a dry patch just to make sure I don't wet the powder upon loading. So far I have not needed a dry patch and the loads go off just fine. Try the different methods out for yourself and see which works best for you.