Midway has them on sale for 8.99 but the 13.00 shipping made me back off on that.

For now I'm going to do my testing with what I have. I found a 7/8-14 hardened steel bolt for a few dollars and bored it the correct size to resize the once firedbrass I got the other day. Tried it out last night and was able to get usable brass out of it. They fit into the BP quite well now. I deprimed them with a spare RCBS depriming pin. I'm going to run them through my tumbler to clean them up a bit then reprime and test them. Should be interesting. I have 3 different guns that this mod could work with so I may end up doing a couple more. So far I only have about $9 invested in this experiment including a shell holder for my press and the 7/8" bolt. I got the BP for free from BPI so that was a blessing. Hope to try it out in the next day or two. Will report back on results.

Almost forgot, I also tried the 25acp cases in my brass 209 capper and they fit. I may need to use a file to slightly reduce the thickness of the lip of the capper but it should hold about a dozen of the cases similar to the way it holds 209's.