HuntingNet.com Forums - View Single Post - Can anybody help with my F.O.C issues
Thread: Can anybody help with my F.O.C issues
View Single Post
Old 10-01-2007 | 04:27 AM
  #9  
The Rev's Avatar
The Rev
Boone & Crockett
 
Joined: May 2005
Posts: 12,563
Likes: 0
From: Burleson Texas
Default RE: Can anybody help with my F.O.C issues
ORIGINAL: nzarcher

I am using 4 inch killer vanes, no wraps, not sure what sort of nock and no uni bushings. Icould shorten my arrows to 26 inches safely enough and try blazers but my calculations still say my F.O.C would be just under 10%. My arrows are rated with spine stiffness of 0.340 and 9.5 grains per inch. Do you think i might be better off going to the ST AXIS 500's that are only 8.1 grains per inch and a spine stiffness of 0.500? I just dont want to under spine my arrows and the nearest proshop is over 3 hrs away. Any suggestions?
NO, get a hold Ausie and let him run some numbers on the program he has, he will get your foc up there in the high teens. PM him and he will hook you up... I guarantee it.
The Rev is offline  
Reply
0