I have been trying to get the slick tricks to shoot out of my Tenpoint TL-7 and I can get them to group at all. I can't get my mechanicals to group the same as my feild points but both the feild points and mechanicals group very well just have to resight it in.
This is what all I have tried I am shoting Carbon Impact bolts with flat nocks. They were 22" with 5" vanes not luck gettiing the tricks to group at all so I cut the shafts down to 20" still no luck but got a little better so then I tried some 2" Blazers still shot about the same. And the Mechanicals shot about 5" right of the feild points but group very well. Should I try a different brand of bolt I want to shoot carbon and should they be 20 or 22"? I am thinking of trying the Easton Thunderbolt, are they good bolts and what would you suggest as far as bolt combination with the Slick Tricks and my Tenpoint TL-7? Thanks