Well, I worked and worked on my bow tonight. I measured only .7" clearance when my MZE is raised all the way up. The Blazers are 0.6", and I can't get any more clearance with my setup. Yep, I tried another hole on the MZE, and then my turnbuckle won't connect lowered all the way. If I set it up for higher clearance, when it drops, it will not be lower than my riser like it should so it kinda defeats the purpose cause now the fletch will hit the horn. When I rotate the fletch with cock fletch out, I get rid of my high nock tear but then get a nock left tear. I want soemthing to work with both duravanes and blazers.

Tearing off the blazers tonight. I had to give em a try. And maybe will again with a new rest on a different bow. The MZE is a great rest, I have two on two bows, and have had it since it came out, but it has limitations. Especially on straight limbed bows. I have no issues on my PSE Mohave. Seems if cables have alot of movement on the guard, it works better.