SA,
Thanks for the compliments, but I have a hard enough time keeping out of trouble with my own wife <img src=icon_smile_wink.gif border=0 align=middle> Perhaps I should put in a disclaimer at the end of my reports? <img src=icon_smile_big.gif border=0 align=middle>
AE,
Thank you for the kind words. As regards to the R-Tec: It simply has a fairly short sight window. Due to the way I am built I use a fairly low anchor point which tends to put pins higher up in the sight window. While I think I could get away with the R-tec, there was a good chance my pin would be way up at the top and my sight picture could be obscured. I had a real problem with the window on the HavocTec last year, and the Razor's is not much longer.
RA,
Thank you. And I am sure Bowtech will take care of you. They have great folks running the shop, and great service. But that doesn't mean you cannot buy a RazorTec too! <img src=icon_smile_big.gif border=0 align=middle>
CG,
An acquired taste perhaps? <img src=icon_smile_big.gif border=0 align=middle> I've always loved the look, but I know some folks just cannot get used to them.
CPA,
Thank you for compliment. I should note I have also spent a bit of time messing around with a new Ultra with the Spiral cam, and if the money situation works out, I'll be grabbing one of those too. You should shoot them both and see what works best for you! In either case you are getting a very nice bow.
Jerry,
NO, YOU DA MAN!!!. Thanx pal. You and I go back a ways online, and we always end up owning something similar or the same...Martin Z-cams..Darton Mav's...Hoyt C.5's...and a DC PAT I hear now..Congrats! I was a bit surprised at your numbers. I would figure the RazorTec to be a bit slower than that. I'm curious about those strings too, but I wonder how it will effect the noise level? I know that while I love them dearly, Winners Choice strings do create some extra noise. So far I've had little trouble with the Hoyt string & harness, so I'll keep em on for now.
<img src=icon_smile_big.gif border=0 align=middle>