HuntingNet.com Forums - View Single Post - GP conicals
Thread: GP conicals
View Single Post
Old 08-09-2007 | 07:37 PM
  #13  
sabotloader's Avatar
sabotloader
Boone & Crockett
 
Joined: Aug 2004
Posts: 11,703
Likes: 0
From: Idaho
Default RE: GP conicals

FG

OK.... I am all ears explain to me your 5/8"@ 100 - I really do not understand...

Results are 5/8" @ 100 yards with the 385s in my winchester.
Here you do not use the word group

5/8" groups has been the worse group i can shoot out of the x-150 with my 80 grains RS and a 385 GP conical. 5/8" is what i have been getting ever since i found this load.
Here you do use the word "groups"

I like the pyrodex RS better in my inline due to all 3 shots grouping while with triple 7 my first shot is always a little high while the next 2 are lower and are the groupers.
And here you say "3 shot grouping"

Since you are shooting a conical from your X-150 - i assume that one shot is going to make a 4/8" hole - that leaves 1/8th for the next two

1/2" was the best but that only happened once. I get disapointed if i dont shoot atleast a 5/8 or 7/8" group out of the x-150.
In this one you do not say range but I really do not care what the range is one shot is 1/2" so all the rest of the shots have to be through the same hole???

i did the stock work and then free floated the barrel. 5/8" groups @ 100 with 80 grains pyrodex rs and a 385 grain great plains conical.
This is your reply to Branson and to me that says 5/8" Group @ 100 with a conical. Are you saying 5/8 inches from one hole to the next???

It does make people wonder.... or is my math off - I have already been wrong twice today might as well go for three
sabotloader is offline  
Reply