BigJ12, you hit it on the head. It appears I have a rs-1 or 2 module that doesn't have a stop and the buss cable post is the stop. Don't know why it got louder all of a sudden. They wrote in 28 inch draw on the bow so i figured I had a RS-3 module and somehow the stop broke off or something( Does the shop write that in or does the factory?). I use 30.75 inch arrows, I like them about an inchpast the shelf to make my hand feel safe so don't know if that length would indicate the overall draw length/module. Not sure whats going on, I just shoot em and rely upon them to set it up. Just know thatthe bowmakesa strange noise on the draw. On release it sounds like the peep sight tube maybe slapping the string now but thats something else i will deal with later. The sound I was getting on the draw has been quieted down by my installation of a small piece of duct tape around the cable where the buss post was hitting it. I am still not satisfied and will be checking out the actual modules to see how they compare to mine. Mine has nothing imprinted on it or if it does its hidden by the cam. My shop has been no help and seem to feel thats justhow the bow is but my bow was the only truth they had and don't look like they are getting anymore. I trust my own feelings and I feel something is not right and can't convince myself otherwise until I examine the modules. The very idea that I|have to place a piece of tape around the string on a $550 dollar bow to quiet it down irks me to no end. I posted some pics to help describe the problem. Anyway Thanks everyone, and I'll let you know how it finally ends. Maybe their right and its nothing but its like when you get a new sound in car you have been driving for years, everyone else says they don't hear it but you know something changed.