RE: Horton Users Please Help
The dial-a-range is for single aim point devices like a red dot or single xhair rifle scope. Each number is another 10 yds, or there abouts. If you use a peep and pin and the peep is mounted on the scope mount rail, it will work the same for that. If you use a multiple aim point like 3 dot red dot or Varizone, there's a way to pin that so it doesn't move accidently. Horton sells a multi line scope for more than a V-zone costs and they fog up bad so far on two I had here at various times. There was a good explanation on the xbow forum on AT on how to do it last year. I'd put it on "2" to start out w/ shoot one at 10 yds to make sure you are on the target, then go to 20. After you're good at 20, turn it to "3" and see where you're at at 30 yds. 30 to 35 would be my limit, but I'd have to check 40 in case of coyote or other varmit, lol. Good luck!!