I sent my 2 Cuddeback C1000 back to factory for repair and I have recieved them back. The type of repairs listed on the printouts were battery tray replacement on one camera and also they said they changed the circuit board. The other camera the circuit board was replaced. O.K. I get out in the woods yesterday I start setting up the camera and like Cuddeback rep told me the camera looked to be updated with the latest and greatest software with the replacement of the circuit board. When the camera powered up it showed the new battery level readout which the camera did not have before and the camera showed that it is now a C3000 and it was the older C1000 before. The C3000 is suppose to be 3.0 megapixel and the older C1000 was 1.3 megapixel. All looks well with the repairs. O.K. I get to the next area for my other camera and I power the camera up and I get no baterry readout level and the camera display reads out that it is still a C1000. It looks like they did not give me the new software in the second camera like they said is suppose to be there. The only diffrence I can see in the printout for repairs is one was a G2 repair and one was a G3 repair what ever that is I do not know?? The only diffrence in the two cameras right now is one has a compact flash card and I did not put one in the second camera. Maybe that has something to do with it. Any Ones help and input I thank you in advance.