Just got them tonight. I don't have access to their GPI specs, but I cut 1" or so off the back end of mine before fletching, and at 30.5" of arrow only they weigh in at approx 9.7gpi. These are the .350 spine, pretty close to a 75/95 pro hunter spine, or a/c/c 3-60 spine (they are .340). I am making these for long distance field/FITA for now, but I expect these to be the perfect hunting shafts and as of now plan to use them for hunting this fall.

Weight of the raw shafts cut to 30.5" are as follows for the dozen

296
296
296
296
296
296
296
296
295
296
296
296
296


Unfortunately the glue in target points are on backorder and haven't shipped yet, so I will be node tuning them, cutting the fronts, and installing glue in points when those get here. I also plan to put them on the spine tester. When all that happens I will update with some more thoughts on where they end up and how they shoot. They did come with inserts, and pin nocks in the wrapper included, but I really want glue in points for these.

So far on the finger spin test they feel pretty straight. Will update with a picture of them later tonight and an fletched spin test from the spinner when I am done fletching.

I believe they retail at around $99 per dozen.