What I posted is basically correct, though maybe not worded clearly. The cams are set at full draw. I checked my cams more closely. The string runs through the center of the groove. If I twist the yoke and move the cam over, it will be off center. The result would be as I was told by BowTech, the string dropping into the groove, wearing the serving. There is no wear at any point on my string or cables, and the cam is no closer to the limb than when new. I have approximetely 400 shots through my Pat now.
Phil.
"Could you guys be quiet, my dad's trying to shoot."<img src=icon_smile_shock.gif border=0 align=middle>