Both of the Pro38 dual cams I have had and still have one the cams do look to be leaning to the right(inside) side with the string coming off the cam to the left side of the bow and when I tried to straighten it on both bows the buss cable would ride way up on the sides of the draw module groove on the inside and it looked like the cam was leaning to left from the inside and to the right on the outside but if they were left leaning to right were the string comes off the cam the buss cables rode perfectly in the groove. Both bow looked almost exactly the same and did the same thing when tring to correct what lean it had so I put them back and had no problems. I never got all the lean out when tring to straighten them up but I bet if you did it could cause some serious problems as far as maybe hitting a limb.
I hope this make sense because I have read it and still get turned around on which way is which<img src=icon_smile_tongue.gif border=0 align=middle>

Edited by - bigcountry25 on 01/27/2003 11:24:49