Holding Pin Steady Problems
Hey guys,
I've got some issues that I'm trying to work through and would like to get some opinions on how I should proceed.
First some background.
My bow has new string from vapor trail.
The bow was tuned after having the string put on.
According to several shop people over several visits the bow fits me. (I'm 5'8" and the DL is 28-28.5")
I'm shooting brand new Carbon Express 350's with blazer vanes
100gr field tips
I used to shoot pretty darn good. Then I started screwing with something that worked. I tried going to back tension. I didn't like or didn't have the right guidence to get it right. Then I changed my anchor point to behind my ear, then I changed my relase length, changed my bow string etc...
I've always had week shoulders from over lifting in HS and not lifting correctly. So recently I had my bow turned down to 52lbs. This has made drawing the bow a breeze and I really like it. I was shooting 64lbs before I had it turned down. When I initially started shooting my bow it was set to 72lbs and I could pull that back without much trouble but holding it there wasn't very pleasant (because of my weak shoulder).
I'm having two issues right now that are really troubling me.
1) I can't seem to hold my pin steady.
and
2) I really want to just let the arrow go. It feels like I'm rushing the shot. Causing my accuracy to be truly horrible. Several inches at 20 yards and I used to shoot under 1.5" at 20 if not even better than that.
Any suggestions on how I should start to figure this out?
Thanks
Tom