Would like to be able to but have only shot the rifle once, and that wasn't really a good session for most as I was shooting conicals. Did fairly well though.

One thing I would suggest is you disassemble the rifle and become familiar with the parts.Be sure to get the firing pin back together correctly (fairly obvious). Make sure the "torch cam" is clean, the matching face of the barrel should also be free of any grease or grit. Remove the breechplug, clean it and put some good anti-seize (or Slick50 ONE grease) on its threads before reinstalling it. Otherwise clean as Cayugad has indicated.

Here is something I hope you find useful: http://home.mchsi.com/~rltsr2/GenesisParts.jpg