Well I still haven't been able to shoot with the sight. I am still waiting on cams and a string for the bow this sight is going to be used for. I did managed to take the sight apart and remove 2x of the pins. I ordered a 6 pin model because I plan to shoot some of the local events this year in open class to help me get better at judging distance at the longer distances. I wanted to have the extra pins on hand but don't plan to shoot it that way often. I now have it setup with green/orange pins.

To say removing the pins was difficult would be an understatement. This thing is quite the contraption. It works and is designed well but if you are not mechanically inclined then order the sight with the pin arrangement you want rather than taking pins out or adding them in later. The micro adjust is smooth, and works well. Each pin, 3rd axis, and gang adjustment for windage and elevation for the whole pin guard assembly are worm drive/micro adjust and work flawlessly. Fit and finish is good, not as nice as say a spot hogg but is still very nice. I really like how 3rd axis is adjusted, that is done to the bubble itself by a worm drive microadjust setup.......very slick and reminds me of the Mag Sight 3rd axis.

Overall for the guy that wants a sight that will be used primarily for hunting and for an occasional 3D shoot and has to have micro adjust everything this is a perfect fit and I still think it is the best micro adjust sight out there. My god the thing is bright too.......if I end up using this for 3D it will need to be tamed down some how because it is simply too bright for tiny pin gaps........so bright they almost get fuzzy and I can see myself not seeing fine detail on a target because of this. I may fabricate some sort of velcro strip that goes around the fiber wrap system that can come off if need be.

Here are pics: