Are you sure it is 6 7/8, or is that what it says it is in the specs. I think it differs depending on configuration and set up. I would measure it and yours and compare them that way.

Another thing to keep in mind is overall bow geometry, not just brace. What is the geometry of the bow you currently shoot? ATA, brace, reflex. All those go hand in hand and you need to look at all of them. If your current bow has a short ATA, 3 inches of reflex in the risor and you have a normal to long draw, that is not a very forgiving set up, even if it does have 7 1/2 inches of brace. Going to a bow like the cybertec with a longer ATA, better reflex geometry(less) and a 6 7/8 inch brace(that's almost 7 by the way) would be a more forgiving set up. That is not even taking into consideration the risor design, awsome grips, and laminated limbs. I myself would rather have less brace than more reflex, but that is a personal thing.

The best thing to do is shoot it and see how it feels.

Is what I am saying is look at the whole picture, not just the brace height, especially when you are only talking like a half an inch.

Paul

Edited by - Paul l mohr on 12/27/2002 18:57:10