RE: Omega Syn Stock Mod ???
Oldwun, i got your shims out in the mail so you should be getting them in 3-4 days. MO Archer, i also got yours out at the same time.
Just start off with 2 shims, and do the paper test, add more if the paper doesnt run to the first lug.
MO Archer, you may have to remove some material off the inside of the stock area, if you see ANY material touching the barrel, mark that area and remove it with a file or sandpaper. I had to do this with my x-150. Just take your time and make sure you get it all clean along the barrel.
Make sure you put the same amount of shims under each lug. Once you get it to float, i took my shims back out and put a couple drops of rubber cement glue to hold them in place. When you torque the bolts down, think of your breechplug, Tighten it by hand and then back off and just snug it up, it doesnt need a lot of pressure. Let me know how it all turns out.
Jon