HuntingNet.com Forums - View Single Post - Barrel Break In
Thread: Barrel Break In
View Single Post
Old 01-19-2007 | 10:24 AM
  #7  
Dan in Alaska
 
Joined: Mar 2006
Posts: 257
Likes: 0
From:
Default RE: Barrel Break In
When I had my .338-06 made, I followed the break-in procedures recommended by the barrel manufacturer - Krieger. Here is their procedure: http://www.kriegerbarrels.com/RapidC...CompanyId=1246

Dan in Alaska is offline  
Reply
0