ORIGINAL: Briman
A powder trickler is an unneeded expense IMHO, I just use a spoon and a steady hand to trickle powder.
I use an empty film canister, you can tap it like a salt shaker and get a little or alot.
Bullet pullers aren't really needed either- you would have to make an awful lot of mistakes in order to justify the expense of one. A pair of sidecutters gripping the bullet at the top of the press with a downward motion of a ram will do the samething- it will mar the bullet but it will still be usable as a plinking bullet.
I have to disagree with this statement. I have used my hammer puller so often because I made ALOT of mistakes when I started out. I would load 6-10 of a certain load and the first 5 would shoot like crap so Id pull them. Or didnt have my seating die adjusted right and needed then too. I would get one!