Greg, I just sent this email to Bowtech;

I purchased a 2007 Allegiance from a Sportsman's Warehouse in Spokane, Washington a little over a week ago. I've shot the bow a couple hundred times since the purchase. While looking at the bow this evening I noticed that the serving around both the top and bottom cams was starting to seperate. Upon closer inspection of the bottom cam I noticed that the serving was not only seperating along one of the loops, but it also appeared to be frayed. After consulting with several friends I decided to send you an email and let you know of the problems I am experiencing. Due to the looks of the loop on the bottom cam I am a little gun shy so to speak when it comes to shooting this bow anytime soon.[/align][/align]I have included photos of both the top and bottom cams at the point of the seperation as well as pictures of the loop on the bottom cam. I would just like to know what you folks think should be done about this problem. You've made an excellent product and I hope that this issue can be resolved faily quickly.[/align][/align]Thanks in advance,[/align][/align]Dan Watts-Messick[/align][/align]I'll wait to hear back from them (hopefully tomorrow?) before I take it back into Sportsman's Warehouse.[/align]