ORIGINAL: willtill
ORIGINAL: bigcountry
Takes apart the same way a 700 bolt does. The bad part is, it doesn't have that little cutout to put a dime or something to hold back the spring. You need a special tool that browning has or specialized service shops that will go in and hold the spring tention until you can screw off the holder.
Do you have a manual that you can post which would demonstrate the 700 bolt disassembly? I do not have a 700, and need the instructions if you have them.
Kindest regards,
-Will in Maryland
Will, I have seen gunsmithing books that show the disassembly. I will have to look for them. Go to brownells.com and start. I will ask my gunsmith if he can suggest anything.