snowtiger308

Might try this procedure - It really sounds like your set-up needs tweeked...

14. How do I adjust and operate my double-set trigger?
Answer: To adjust the triggers, first remove the trigger group from the stock. Loosen both the front and rear adjusting screws until they no longer contact the triggers. Tighten both screws until they just touch the triggers. Install the trigger assembly in the stock. Operate the triggers to get a feel for their sensitivity. Cock the hammer and release it using only the front trigger. Repeat this procedure, setting the rear trigger before pulling the front. If further adjustment is necessary, adjust both screws the same amount. In other words, if the rear screw is tightened one turn, the front screw should also be tightened one turn. Continue this procedure until the trigger adjustment is satisfactory.