ORIGINAL: OldFart
Greets fm CO
Just how much anti sieze do I need to apply to the breech plug. I am applying it for the first time to my new Knight Revolution. Seemed like I put too much as some came back out. I used to do this to spark plugs and it worked very well, same principle, I guess. My manual says to only tighten the plug hand tight. Is this enough?
Pardon my ignorance but this is my first inline.
Ray
I like to coat all the threads level on the plug. Also I expect some anti seize to come back out the back when I screw in the plug. Just some Q-tips and you can clean that up real easy. As for screwing it in hand tight, I screw the plug in, then back it off 1/4 turn. I then have no problems getting it back out.
On the range every 10 shots or so, I like to take the plug and give it a twist back and fourth to make sure it is not seizing.