ICBS has a full kit minus the dies for under $250. You can start reloading very cheaply though with a Lee Classic reloader in your specific caliber for around $20 though. That is what I have done and it seems to put out some fine reloads for very inexpensive. All you need is the Lee kit and a rubber or wooden mallet and a sturdy surface. A scale helps too but the included dipper will get the job done. You can see what I am talking about at the Lee reloading website. You will also need your primers, a good powder for the load that you are wanting to do and some bullets. You will need cases too if you havent been saving your old ones.