HuntingNet.com Forums - View Single Post - How do you fletch your BLAZERS?

10-27-2006 | 03:15 PM

#7

Bigpapascout

Nontypical Buck

Joined: Feb 2003

Posts: 1,161

Likes: 0

From: In Teh Garage (Rossville, GA USA)

RE: How do you fletch your BLAZERS?

Quote:

ORIGINAL: Bols

Quote:

ORIGINAL: MichaelT.

squeegee,

I remembered seeing this a bit back and found the link... Hope this helps.

http://www.huntingnet.com/forum/tm.aspx?m=1741010

God bless.

Thanks for pulling that up Mike. I appreciate it.

If you don't care to follow the link, 3/4" from the end of the shaft.

On the Bitz clamp, it is the third line (aka, the second short line from the bottom of the clamp)

Hope this helps,
Bols

well that depends on what kind of nocks you are using a longer or shorter nock will change the length so it is best ti put a mark on the first arrow you are going to fletch, place it in the jig with fletch in clamp place the clamp on the jig to make sure every thing is lineing upthis way you will be sure to have your new fletching where you want them on the arrow.
Hope this helps

Reply

0