<BLOCKQUOTE id=quote<font size=1 face='Verdana, Arial, Helvetica' id=quote>quote:<hr height=1 noshade id=quote>
BowTech Shooter I have a great question and maybe the R&D man can help. BowTech is going to make 3 different bows using the same dual cams and with the ata being different on each one, will they use the same modules? Say a #2 mod will be a 30 inch draw on the DC Pro 40, a 29 inch on the BK Pro high brace, a 28 inch on the BK Pro low brace and a 27 inch on the DC Pat? I guess I'm asking if the bows will all have the same modules and maybe a 30 inch DC Pat might be a &quot;short&quot; 30 or a 30 inch DC Pro 40 might be a &quot;long&quot; 30 incher<img src=icon_smile_clown.gif border=0 align=middle>?
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face='Verdana, Arial, Helvetica' size=2 id=quote>


WWAG, The easiest way for me to tell you about the draw mods is that they will be the same as they are now.
A #1 module will be the longest draw length available for each individual model.
Example: on the DC Patriot a #1 mod will be for 30&quot; draw, on the Short Brace BK2 a #1 will be for 29&quot; draw, On the Tall brace BK2 a #1 will be 30&quot; draw and on the Pro 40 Dual a #1 mod. will be for 31&quot; draw. Bow geometry and configuration make them vary.

Also notice the duallys have 6 draw mods now instead of only 5.

I hope that makes sense to you...