Welcome, it's good to see you posting here.

If you are pulling the 50# or more at your draw, you have properly spined arrows for the bow and are getting optimum arrow flight and can put the arrow right where it needs to go for a quick and clean kill, there's no doubt in my mind that it'll take most N. American game.

Couple of questions for you. Do you know when the bow was made? How long is the bow? Is the bow marked 50# @31"? (most are weighed at 28" unless custom built) Are you drawing the bow 31"? (if you're not sure, have your draw measured with the bow) Are you pulling 50# at your draw? (again, if you're not sure, have the bow weighed at your measured draw). A word of caution, if the bow is an older bow made in the 60s-70s and is a relatively short bow (under 62&quot and you are drawing it 30+", you may want to consider another bow. The older bows tended to be short and an older bow doesn't have the advantage of the newer adhesives used today, so there is a possibility that the bow could let go and delaminate (literally come unglued).

Make em sharp and shoot em straight, or leave em home.