I'm going to dissagree with the kisser button thing. You don't need a kisser and a peep. They both do the same thing and a peep is actually more accurate. And besides you could put the kisser button in the wrong place just like your peep probably is and still have the same problem. Or worse yet have the peep and the kisser in the wrong places and be fighting them all the time. I have seen it happen. The peep was too high the kisser too low, what a mess.

If you can post a pic of you at full draw, it's almost impossible to know what is going on otherwise. And it will still be difficult without actually seeing the bow and you shoot it. Do you have a pro shop near by that can check it out? That would be my best advice.

If it were me I would take everything off your bow and start from scratch. I would re-install the rest in the proper position then work on your form and anchor points with no peep or sights on the bow. Then when you have that set install the peep at the correct height and then the sights. And tune from there.

Paul