Glad to hear that improvements have been made. I know I've said this more than once but are your inner cams down all the way? The bow may say its on 27" on the sticker but then again look what the shop told ya.

I found my old Hoyt manual. The allen screw in the green (inner cam) can be removed and you can rotate the cam in the "+" or "-" direction. You should go "-" or toward the letter "F" and find a hole that the allen screw will go to and re-tighten. Repeat this with the bottom cam and make sure both are in the same position.

Before you attempt this. Locate your manual and verify. It should be in there. Then again the sticker may be correct. Just trying to help.