This same topic came up a few wks back with the QAD Ultra rest having the same problem. I was one also experencing fletching contact on my QAD. Both rests are very similar in operation, and design. Someone suggested trying to move the rest forward if able. I checked it out, and saw I had lots rm to move my QAD further forward. I simply marked the top & bottom of the rest with a pencil mark on the side of the riser, loosened the allen head bolt, and small tightening screw, moved it forward, and retightened. Guess what, it worked. No more fletching contact. I didn't even need to readjust my cord length for the drop. Butplacing moreforce on thedrop might also helped, so it drops faster. Just a thought for you!