I had trouble with the fastflite 200 spoolin off so ;

1. take the cap off, it has a layer of plastic that has 2 rings that stickup about a 1/16 , that is whattightensthe tolerance so that the larger line cannot be used. I just took a sharp knife and skinned the one closest to the threads completly smooth, then took some fine sand paper and smoothed it a little more.

2. also make sure the bale is full of line, but not too much , i think it was around 70 ft.

works like a dream for now, the pick up pins seem a little weak, but i need a little more time to tell.( back to work for a couple of days)