ORIGINAL: Rick James
Because your cam and a half system is not synchronized. Do a search on creep tuning. Also, from my experience on Hoyt's it is extremely critical to make sure you have tiller settings correct.
Thanks. I currently have my limb bolts crank'd down all the way to the bottom with a 30" draw. Is it possible for tiller to be wrong with the limbs cranked all the way down?
I put on a new string in February and it has been shot in. My drop away is set up to as early as possible and my rest cable and knocks are adjusted to eliminate fletching contact. I'll have tolearn about "creep tuning".