<BLOCKQUOTE id=quote<font size=1 face='Verdana, Arial, Helvetica' id=quote>quote:<hr height=1 noshade id=quote>
it seemed to shorten up my draw length a good amount. i have to lean my head forward to reach my kisser button now. i'm going to have to go out and get the 30inch module. but in the shots i took, it doesn't seem to be wearing any. i put wax on the cable and none of it came off. i called up my pro shop and asked what they did to it and he said he just moved the stop to make it a half and inch to an inch longer draw length because they didn't have any 30inch modules in. he also said that will take a couple weeks to get in so i need to find a place to get it. also i brought up to him the wearing on the cable and he said that all bows with cams similar to that do it. but they are a new dealer with bowtech so they are not familar with it i guess. i don't know, it doesn't seem normal to me.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face='Verdana, Arial, Helvetica' size=2 id=quote>
I think I have a #2 module. But, by moving the draw stop two marks should have only been 5/16" or less.
Are you sure you want to go a whole inch longer?
If so then, if I were you I would take it back to the dealer and ask him to give you a #2 module and set the bow up right, since he didn't do it right the first time. Can you possibly give me the shop name so I can call or email them and explain the cam to them. Maybe the persons name that you spoke to also. If they're not setting bows/cams up right it's not doing them or BowTech any justice. I'll help you out as much as I can...
Please email me if you would
[email protected]