The vast majority of recurves are marked with AMO bow length and the draw weight at a certain draw length on the riser or the limbs. Typically it'll be like: 62" 50#@28". If it's a takedownrecurve, pull the limbs offand look at the bottomthe wedge area where it meets the riser.Sometimes bowyers will the mark limb poundage there. If it'sdraw weight and length are not to be found, then it just wasn't marked or the bow has been refinished and the stats were sanded off with the old finish. In any case, measure your draw length with that particular bow, then go find a bow scale and measure the draw weight at that length.