Welp, looks like all is well under control here... <img src=icon_smile_big.gif border=0 align=middle>
I'd just like to add that my 2K2 BKII OP2 (yikes..say that three times fast) with 61 Lb draw weight, a 28" module and grip off (AMO draw 28.75" and brace of 6.75"
313 grain arrow (8 grains over IBO) clocked 314 FPS with a tie -in nock, 2 leeches (at just about the farthest points possible) and a fletcher tru-peep. With a string loop, the speed dropped to 311.
Do the math...that's some serious KE for a 61 LB bow. With the grip on AMO draw length was 28.3" and brace was 6.3 inches.
W/ the 29" mods it was in the high 320's with the tie nock set-up.
Barring the speed (and I often wonder if people think i'm a total speed freak, cause I'm not...I'm an accuracy freak first, but If I don't have to sacrifice accuracy and can get those speeds, it's a no brainer AFAIC..but I digress), the bow is very shootable at that speed and draw length...It also was not noisier than the majority of onecams I have owned at those same specs (limbsavers and a good stabilizer are a given on ANY of my bows regardless of cam design, so that is how my comparisons are made). With a 405 grain arrow it was shooting just under 280 FPS.
Can't wait for my DC PAT...same speeds..another 1.5" of brace...WOOHOO!
JeffB <img src=icon_smile_big.gif border=0 align=middle>