HuntingNet.com Forums - View Single Post - 416 Rigby Cast Bullet Load
View Single Post
Old 03-26-2006 | 03:43 AM
  #15  
Briman's Avatar
Briman
Nontypical Buck
 
Joined: Feb 2003
Posts: 4,781
Likes: 0
From: Body in SE WI, mind in U.P.
Default RE: 416 Rigby Cast Bullet Load

Very interestingly, if one takes the Hornady 500-grain .458 diameter solid bullet and compares the penetration that results from impact speeds varying from about 1500-fps to 2500-fps, one finds that the higher impact speeds produce the least penetration. When driven to about 1500-fps (as the 45-70 will do) one finds that such solids produce nearly 6-feet of penetration in wet newspapers. When the same bullet is driven to about 2100-fps (as is characteristic of the 458 Winchester Magnum) one finds that the penetration is reduced to about 4 to 4 and 1/2 feet. When one tests the same bullet at 2300-2400 fps (as is characteristic of the 458 Lott) one finds that the penetration comes up nearly 20% short of that produced by the 458 Winchester. And when one tests the same bullet at the blistering speeds characteristic of the mighty 460 Weatherby Magnum, one finds that the penetration achieved is the most shallow produced by the various 458s."
LOL. I know a guy who made a reverse Texas heart shot on a deer with a .458 WIN mag loaded with a cast bullet at reduced velocities. He Shot in straight on and the bullet penetrated all the way through the deer the long way.
Briman is offline  
Reply