Wolfhound76

I know there are no bore standards but you would really think on an American made barrel from the same manufacturer that the bore diameters from gun to gun would be closer... I am not a rocket scientist so my mic measurements are not the best... I have some 320 REALs they measure at the top ring .500-.501 - if I drop that into the QLA they hang up just a bit but just a slight push and they will slide down the barrel - to get them out turn the gun upside down and give a slight jerk and it will come out the bore. Yet I am able to load any bullet I have .451/.452's with the 24's with a minimum force - if the QLA did not get in the way I could probably push it all the way down with my thumbs... and I think I mentioned also the same thing for .458's and the MMP sabot. If I use a "crush rib" with a 300 grain .452 Hornady XTP it seems like it is TO easy and with the other sabot same thing. So why? is there that much difference between TCguns...

Sorry bsteve - not meaning to hijack your thread....